WEG Shark Drive Variable Frequency Drives

The WEG Shark Variable Frequency Drive is a all stainless steel NEMA 4X and is designed to complement the ruggedness of WEG’s Shark Motor Product Line. The WEG Shark line is ideal for high pressure hose wash down and corrosive applications such as food processing and pharmaceutical industries. With the Shark triple control capability (Volts/Hertz, Sensorless or Closed Loop Vector) and the ruggedness it succeed in any industrial application environment.

Applications


  • Pumps
  • Fans / Blowers
  • Conveyors
  • Rollout tables
  • Agitators
  • Mixers

Features


  • NEMA 4X All Stainless Steel Enclosure
  • V/Hz and Sensorless Vector Control
  • Self Tuning
  • Single and Three-phase input voltage
  • 200-240V or 380-480V input voltage
  • 150% current overload capacity
  • Dynamic Braking transistor
  • 32 bit RISC microprocessor controlled PWM output
  • 1.25 / 2.5 / 5 / 10 kHz adjustable switching frequency
  • Six isolated programmable digital inputs
  • Three programmable relay outputs (250Vac / 1A)
  • Two isolated programmable analog inputs
  • Two programmable analog outputs

Protective features:

  • Over current
  • Motor overload
  • Drive over temperature
  • Output phase-to-phase and phase-to-ground short circuit
  • DC bus over and under voltage
  • Power supply under voltage and phase loss and external fault

Control features:

  • Linear and « S » ramp acceleration and deceleration
  • Local/remote control
  • DC braking
  • Torque boost
  • Motor slip compensation
  • Electronic pot
  • Preset speeds
  • Adjustable V/Hz profile
  • Maximum and minimum adjustable frequency limits
  • Two skip frequencies
  • Adjustable output current limit
  • JOG, ride-thru and flying start and PID regulator

Display readings:

  • Motor speed
  • Frequency, voltage, current and torque
  • Output power (kW)
  • Four last faults
  • Drive status
  • Digital and analog I/O status,hours powered and hours running

Ambient:

  • 104�F (40�C), 3300 ft (1000m) altitude, 90% humidity, non-condensing

Optional Features:

  • Close loop vector control
  • RS-485 Serial Interface
  • Fieldbus Comm: Profibus DP, DeviceNet or Modbus RTU
  • Encoder buffered output
  • Additional digital and analog I/O

Ordering Information and Accessories:


Shark Drive-NEMA 4X Enclosure
Single and Three-Phase-230V

Catalog Number HP AMPS Dimensions
H x W x D
Shpg.
wt.
Mult.
Sym.
CFW090006TDN4Z 1.5 6 14.2 x 9.2 x 8.5 22 V1
CFW090007TDN4Z 2 7 14.2 x 9.2 x 8.5 22 V1
CFW090010TDN4Z 3 10 14.2 x 9.2 x 8.5 22 V1

Three-Phase-230V

Catalog Number HP AMPS Dimensions
H x W x D
Shpg.
wt.
Mult.
Sym.
CFW090006TDN4Z 1.5 6 14.2 x 9.2 x 8.5 22 V1
CFW090007TDN4Z 2 7 14.2 x 9.2 x 8.5 22 V1
CFW090010TDN4Z 3 10 14.2 x 9.2 x 8.5 22 V1
CFW090016TDN4Z 5 16 16.2 x 10.2 x 8.5 33 V1

Three-Phase-230V – 460V

Catalog Number HP AMPS Dimensions
H x W x D
Shpg.
wt.
Mult.
Sym.
CFW090003TGN4Z 1.5 3.6 14.2 x 9.2 x 8.5 22 V1
CFW090004TGN4Z 2 4 14.2 x 9.2 x 8.5 22 V1
CFW090005TGN4Z 3 5.5 14.2 x 9.2 x 8.5 22 V1
CFW090009TGN4Z 5 9 16.2 x 10.2 x 8.5 33 V1
CFW090013TGN4Z 7.5 13 16.2 x 10.2 x 8.5 33 V1
CFW090016TGN4Z 10 16 16.2 x 10.2 x 8.5 33 V1

 


The WEG Shark Drive –  Single and Three-Phase-230V

WEG CFW090006TDN4Z, WEG CFW090007TDN4Z, WEG CFW090010TDN4Z


The WEG Shark Drive – Three-Phase-230V

WEG CFW090006TDN4Z, WEG CFW090007TDN4Z, WEG CFW090010TDN4Z, WEG CFW090016TDN4Z


The WEG Shark Drive – Three-Phase-230V – 460V

WEG CFW090003TGN4Z, WEG CFW090004TGN4Z, WEG CFW090005TGN4Z, WEG CFW090009TGN4Z, WEG CFW090013TGN4Z, WEG CFW090016TGN4Z

Contact our experienced variable frequency drive specialists at Variable Frequency Drive Co at 510-490-2187 to get your quote, place your order and arrange for shipping.  Our electrical specialists are standing by and ready to help